Brooktrout Driver InstallationBrooktrout Driver InstallationBefore the FaxRush Hardware Fax Module can be used with Brooktrout boards, the driver must be installed.
Note: Only
the OmniRush driver kit may be used with OmniRush. No
other Brooktrout drivers should be present on the OmniRush Server PC.
Never use
any driver installer other than the OmniRush driver installer.
Never use a Brooktrout driver
kit from Brooktrout or any other source. It will not
work, and will make a mess that must be resolved before the correct drivers
can be installed. If
such drivers are on the system, remove them according to the corresponding
documentation. Then
reboot the system, and continue with these installation steps.